Cerfacs Enter the world of high performance ...

The 17 June 2021 at 14h00

PhD defense: Thomas ASTOUL – “Towards improved lattice Boltzmann aeroacoustic simulations with non-uniform grids: application to landing gears noise prediction.”

Marie LABADENS |  CERFACS, TOULOUSE - SALLE ADMINISTRATION EN VISIOCONFÉRENCE  |  

Abstract:

Predicting landing gear noise is a major concern for an aircraft manufacturer, since it contributes to about 40% of the total aircraft noise during the approach phases. Flight tests and those carried out in anechoic wind tunnels have enabled the understanding of noise generation mechanisms, as well as the design of low noise devices. However, these methods are time consuming and costly to set up. The use of computational fluid dynamics (CFD) is thus emerging as an essential complement to these experimental approaches. The flow around landing gears is complex and highly unsteady, and the noise generated is broadband by nature. Given these characteristics, it is therefore necessary to use unsteady methods with high-fidelity turbulence modeling such as Large Eddy Simulation (LES), to predict these acoustic sources. The lattice Boltzmann method (LBM) is a numerical approach that has recently shown a strong potential for this type of application, thanks to its accuracy, its low restitution time and its ability to handle complex geometries. It is consequently adopted for this thesis. Aeroacoustic simulations require a high level of accuracy since acoustic fluctuations, which are several orders of magnitude smaller than aerodynamic ones, must be properly captured and propagated. Nevertheless, the non-conforming grid interfaces used in LBM have the inconvenience of generating spurious vorticity and acoustics that propagate in the fluid core, which may affect the noise predictions. The PhD objective is to develop new grid coupling models in the “LaBS/ProLB” LBM solver, and to validate them in the context of landing gears aeroacoustics. Two main directions are addressed to overcome these phenomena: 1/ A study of the numerical scheme in the fluid core is performed, highlighting the involvement of non-hydrodynamic modes, specific to the LBM, in the generation of vorticity and of a portion of the spurious acoustics generated at mesh interfaces. After a thorough study of the implication of these modes, an appropriate collision model (H-RR) is chosen to filter them out during a simulation. The stability and accuracy of several LBM schemes including the H-RR one under typical aeroacoustic simulation conditions are also investigated. This study highlights stability issues, as well as questionable precision of many advanced LBM schemes available in the literature. 2/ A direct coupling algorithm between two grids of different resolution is proposed. This algorithm allows to greatly improve the accuracy of the non-conforming grid interfaces, and hence to reduce the spurious acoustic emission produced by the crossing of vortices composing the wakes. Finally, the LAGOON landing gear allows for the validation of these numerical ingredients. An aerodynamic study and then an aeroacoustic one via a coupling with an acoustic propagation code based on the Ffowcs Williams and Hawkings analogy (FW-H) are conducted. The limitations of this analogy in its solid formulation, mostly used to predict landing gear noise, are exposed. Lastly, the effect of extra components of increasing complexity on the noise generated is investigated.

Keywords: Lattice Boltzmann method,Landing gear noise,Grid refinement,Aeroacoustics,CFD,CFD/CAA coupling

Jury:

AdvisorM. Pierre SAGAUTAix Marseille Université
RefereeM. Damiano CASALINOUniversité de technologie de Delft
RefereeM. Jonas LATTUniversité de Genève
MemberM. Alois SENGISSENAirbus Operations SAS
MemberM. Éric MANOHAONERA
MemberM. Stéphane MOREAUUniversité de Sherbrooke
MemberMme Véronique FORTUNÉUniversité de Poitiers
Invited memberM. Jean-François BOUSSUGECERFACS

 

NEWS

Thierry Poinsot officially entered the French Academy of Sciences

CERFACS |  8 November 2021

Thierry Poinsot officially entered the French Academy of Sciences on October 12. See presentation here :Read more


The AVBP code from CERFACS at the heart of for PRACE projects from the 23rd call

CERFACS |  30 September 2021

Cerfacs is involved in three PRACE projects of the 23rd call for which hour allocation runs from 01/10/2021 to 30/09/2022. Researchers from ECL/LMFA UMR5509 (Ecole Centrale de Lyon) and IMFT (UMR 5502) laboratories have earned projects entirely based on the use of the LES solver developed by Cerfacs AVBP and involve the support of experts from the CFD and COOP teams underling the importance and effectiveness of collaborations between French labs and Cerfacs. Alexis Giauque from ECL/LMFA UMR5509 (Ecole Centrale de Lyon) has obtained not only one but two PRACE projects! The first project LESFAN (RA0101, 30 000 000 CPU hours on Irene/Rome TGCC) is based on the use of AVBP in the turbomachinery version to study the generation of noise by a fan of a real airplane engine. The second, PRACE-EDGES (RA0101, 40 000 000 CPU hours on Irene/Rome TGCC) focuses on LES modeling of dens gas in complex geometries. To do so, the LMFA Team has developed advanced thermodynamic closures in AVBP allowing the direct simulation of such flows. Laurent Selle from IMFT (UMR 5502) has received CPU hours for the GASTON project (RA0061, 30 000 000 CPU hours on Marenostrum BSC) which aims to study the structure of hydrogen flames in porous materials. For this, IMFT and Cerfacs will perform coupled simulations considering the reactive flow with AVBP as well as the conduction in the porous medium with AVTP which is known to play an central role in the flame stabilization process. Carlos Perez Arroyo from IMFT (UMR 5502) received 16 Mh CPU hours on Joliot-Curie Skylake partition to support his project WONDER.Read more

ALL NEWS